our logo
The Chimney Sweep Online Fireplace, Woodstove, Gas Stove and Barbecue Shop

CLEARANCES TO COMBUSTIBLE WALLS

Pacific Energy Summit Classic Wood Stove

STOVE DIMENSIONS: 25-3/8" WIDE X 23-1/2" DEEP X 28-1/2" TALL

CONNECTOR PIPE USED: 6" SINGLE-WALL OR DOUBLE-WALL STOVEPIPE
HEARTH (FLOOR PROTECTION) REQUIREMENT: ANY 1/4" NON-COMBUSTIBLE MATERIAL
MINIMUM HEARTH EXTENSION FROM REAR OF STOVE:  0"
MINIMUM HEARTH EXTENSION FROM SIDES OF STOVE: 6"
 MINIMUM HEARTH EXTENSION FROM VIEWING WINDOW: 16"
Pacific Energy Summit Classic Clearances Diagram
FLAT WALL INSTALLATIONS: Series A
s/n < 440,000		Series B
s/n > 440,000

 

CORNER INSTALLATIONS: Series A
s/n < 440,000		Series B
s/n > 440,000
A: STOVE TO BACKWALL:
SINGLE-WALL STOVEPIPE
DOUBLE-WALL STOVEPIPE
MANUFACTURED HOUSING*
9"
6"
7"
9"
7-1/2"
10"
G: STOVE TO CORNER WALLS:
SINGLE-WALL STOVEPIPE
DOUBLE-WALL STOVEPIPE
MANUFACTURED HOUSING*
4"
4"
5"
6"
5"
8"
B: STOVE TO SIDEWALL:
SINGLE-WALL STOVEPIPE
DOUBLE-WALL STOVEPIPE
MANUFACTURED HOUSING*
12"
12"
14"
14"
13"
18"

 

H: CENTERLINE PIPE TO CORNER WALLS:
SINGLE-WALL STOVEPIPE
DOUBLE-WALL STOVEPIPE
MANUFACTURED HOUSING*
18-3/4"
18-3/4"
19-3/4"
20-3/4"
19-3/4"
22-3/4"
C: CENTERLINE PIPE TO BACKWALL:
SINGLE-WALL STOVEPIPE
DOUBLE-WALL STOVEPIPE
MANUFACTURED HOUSING*
17-1/2"
14-1/2"
15-1/2"
17-1/2"
16"
18-1/2"

 

I: DIAGONAL, CORNER TO FRONT EDGE:
SINGLE-WALL STOVEPIPE.
DOUBLE-WALL STOVEPIPE
MANUFACTURED HOUSING*
59"
59"
61"
61-3/4"
60-1/3"
64-1/2:
D: CENTERLINE PIPE TO SIDEWALL:
SINGLE-WALL STOVEPIPE
DOUBLE-WALL STOVEPIPE
MANUFACTURED HOUSING*
24-3/4"
24-3/4"
26-3/4"
26-3/4"
25-3/4"
30-3/4"

 

J: CORNER TO EDGE OF HEARTH:
SINGLE-WALL STOVEPIPE
DOUBLE-WALL STOVEPIPE
MANUFACTURED HOUSING*
56"
56"
57"
56-3/4
55-3/4
58-3/4
E: MINIMUM HEARTH WIDTH: 36" 36"

 

L: HEARTH WIDTH AT 16" FROM DOOR: 36" 36"
F: BACKWALL TO FRONT OF HEARTH:
SINGLE-WALL STOVEPIPE
DOUBLE-WALL STOVEPIPE
MOBILE HOME W/ DOUBLE WALL PIPE
50"
47"
48"
50"
48-1/2"
51"

 

COMBUSTIBLE ALCOVE DIMENSIONS:
MINIMUM
MINIMUM
MAXIMUM


55-1/2"W
84" T
48" D
57-1/2"W
84" T
48" D
* NOTE: ALCOVE AND MANUFACTURED HOUSING INSTALLATIONS REQUIRE DOUBLE-WALL STOVEPIPE

Setting up the Summit Classic to burn air from outside the house

OUTSIDE AIR SUPPLIED FROM VENTILATED CRAWLSPACE
Summit Outside Air through Floor Diagram
Insert a length of 4" rigid or flexible aluminum intake pipe into the knockout hole in the bottom of the air plenum and extend it down through a 4-1/8" hole in the floor, terminating below the floor joists and insulation. Caulk around the intake pipe where it penetrates the floor and use silicone cement to glue a piece of 1/4" wire rodent mesh to the bottom.
OUTSIDE AIR SUPPLIED THROUGH BACKWALL
Summit Outside Air through Backwall Diagram
Insert a length of 4" rigid or flexible aluminum into the knockout hole in the rear of the air plenum and run back through a 4-1/8" hole in the outside wall behind the stove. Attach a standard 4" dryer vent termination on the outside of the wall, removing the flapper plate and substituting a piece of 1/4" rodent mesh silicone-cemented in place.

Series A
Install Manual Button
 s/n <440,000
Series B
Install Manual Button
s/n >440,000

Click to View or Download the installation manual in .pdf format

Click to return to our Pacific Energy Summit Classic Wood Stove page. For other options, click a button below.

Wood Stoves Button       Pacific Energy Button       Home Button

The Chimney Sweep, Inc.
913 Harris Avenue
Bellingham, WA 98225-7032
1(888)-354-6722 toll-free in U.S. & Canada
1(360)-676-9080 FAX
http://www.chimneysweeponline.com

To send us E-Mail, Click Standard E-Mail Window or Contact Us Button (our reply form)
Copyright © 1996 - 2019 The Chimney Sweep, Inc.