The Chimney Sweep Online Fireplace, Woodstove, Gas Stove and Barbecue Shop
DIAGRAM #1: FRAMING THE ENCLOSURE A: Opening Height, Floor to Header (minimum)........... 47-1/16" B: Opening Width (minimum).......................................... 37-7/8" C: Opening Depth (minimum).......................................... 27-1/4" D: Floor to Bottom of Enclosure Ceiling Framing................. 84" F: Floor to 8" Combustible Mantel (minimum)...................... 60" G: Edge of Opening to Combustible Sidewall (minimum)..... 19" H: Hearth (floor protection) Extension in Front of Opening... 18" H(a): R Value of Non-Combustible Hearth Material........... 1.00 I:. Hearth (floor protection) Minimum Width................... 41-3/4" |
DIAGRAM #2: FIREPLACE DIMENSIONS J: Floor to Top of Header Standoffs....................... 47" K: Front Height, Excluding Header Standoffs.. 37-1/4" L: Front Width........................................................ 36" M: Rear Width, Including Standoffs................. 37-3/4" N: Fireplace Depth, Including Standoffs.......... 24-3/4" Q: Front of Faceplate to Centerline Flue.......... 15-5/8" DIAGRAM #3: CORNER INSTALLATIONS |
|
|
ELECTRICAL WIRING FOR BLOWERS Electrical wiring (115 Volts) feeds through knockout on either side panel near the floor. Wiring connects to a two-blower harness inside the convection chamber under the firebox. |
The Montgomery WFP75 may be installed using any of the ASHT chimneys listed below: